PENDIX eDrive500

Tooteinfo:

The Pendix eDrive500 conversion kit turns your bike into a reliable and powerful eBike. The system fits almost every frame type, no matter if city, trekking, load or mountain bikes, there just has to be enough space for the battery and the motor on the frame. It can be mounted independently of the impeller size, gear shift or brake system. The system supports belt and chain drive. This must be on the right side of the bike and your bike must have a BSA bottom bracket.

The Pendix eDrive500 is ideal for your routes from 62* km to 120* km in length. The complete system weighs only 7.3 kg.

The mid-mounted gearless motor is mounted instead of the left crank. Due to its construction and position on the bike, it provides a particularly natural riding feeling and is absolutely noiseless. With an output of 250 watts and a maximum torque of 65 Nm, it supports your pedalling performance up to a speed of 25 km/h (legally permissible maximum value for EU countries). Higher speeds can be achieved by using pure muscle power. As the motor does not have a gearbox, there is no noticeable pedaling resistance when the battery is switched off, so you can still use your bike as before.

The 48 V Pendix ePower500 (battery) has a capacity of 500 Wh and works on the basis of modern lithium-ion technology. It can be easily removed from the bike and fully recharged within 3 hours and 10 minutes using the supplied 160 W charger. While driving, the battery shows you the current charge level through the color changing LED ring. The support levels can be selected on the rotary wheel above the battery. This smart design means you don't need an additional display on the handlebars. If you still want to have current data visible on the handlebars, you can use the Bluetooth function of the battery to connect it to your smartphone and the Pendix.bike PRO app. The battery has a USB interface for charging external devices such as your mobile phone.

The Pendix ePower is mounted with a metal holder directly on the bike frame.

Jalgrattale kinnitamine: 

- BSA bottom bracket
- Sufficient space for the Pendix components
- 4-hole chainrings with the connection dimensions 4 x 104 mm or 4 x 64 mm, can be used on the Pendix crank
- Bicycle must have at least 2 working brakes
- If your bike does not have any screw points for the battery holder, we offer clamp holders for mounting on the frame. A band tensioning tool is required for the correct installation of the clamp holder.
You can also find these points in detail on our page "Installation requirements".
If you are unsure, then please choose the attachment by the specialist dealer, who will check your bike again before attachment.